BS Codes – Table7

Part 1: Pressure differential devices — Section 1.4 Guide to the use of devices specified in Sections 1.1 and 1.2

Incorporating Amendment No. 1

ISO 3966 1977

Part 2: Velocity area methods

Section 2.1: Method using Pitot static tubes

Confirmed March 1998

ISO 7145 1982

Part 2: Velocity area methods Section 2.2: Method of measurement of velocity

at one point of a conduit of circular cross section [ISO title: Determination

of flowrate of fluids in closed conduits of circular cross-section — Method

of velocity measurement at on point of the cross-section]

Confirmed March 1998

ISO 7194 1983

Part 2: Velocity area methods

Section 2.3 Methods of flow measurement in swirling or asymmetric

flow conditions in circular ducts by means of current-meters or Pitot static tubes

[ISO title: Measurement of fluid flow in closed conduits —

Velocity area methods of flow measurement in swirling or

asymmetric flow conditions in circular ducts by means of current-meters

or Pitot static tubes]

ISO 3354 1988

Part 2: Velocity area methods

Section 2.4: Method of measurement of clear water flow using current meters in full conduits and under regular flow conditions

Air-cooled blastfurnace slag aggregate for use in construction

Part 1: Tubes

Section 1.1: Specification for steel tube

Part 1: Tubes

Section 1.2: Specification for aluminium tube

Part 2: Couplers

Section 2.1: Specification for steel couplers, loose spigots and base-plates

for use in working scaffolds and falsework made of steel tubes

Incorporating Corrigendum No.1

Part 2: Couplers

Section 2.2: Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding

Part 3: Specification for prefabricated mobile access and working

towers (Implementation of HD 1004)

Incorporating Amendment No.1